{
  "flow_rate_statements": [
    {
      "statement": "The observed flow rate is approximately {flow_rate}%."
    },
    {
      "statement": "The flow rate appears to be set at {flow_rate}%."
    },
    {
      "statement": "Current flow rate is measured at {flow_rate}%."
    },
    {
      "statement": "The printer is operating at a flow rate of {flow_rate}%."
    },
    {
      "statement": "The flow rate value recorded is {flow_rate}%."
    },
    {
      "statement": "Flow rate settings indicate {flow_rate}%."
    },
    {
      "statement": "Based on observations, the flow rate is {flow_rate}%."
    },
    {
      "statement": "Flow rate during this print is around {flow_rate}%."
    },
    {
      "statement": "Observed extrusion flow rate: {flow_rate}%."
    },
    {
      "statement": "Flow rate appears consistent at {flow_rate}%."
    },
    {
      "statement": "Flow rate during calibration was noted as {flow_rate}%."
    },
    {
      "statement": "The flow rate value configured is {flow_rate}%."
    },
    {
      "statement": "The material flow is approximately {flow_rate}%."
    },
    {
      "statement": "Monitoring results show a flow rate of {flow_rate}%."
    },
    {
      "statement": "Real-time flow rate analysis gives {flow_rate}%."
    },
    {
      "statement": "The effective flow rate currently is {flow_rate}%."
    },
    {
      "statement": "Flow rate observation: {flow_rate}%."
    },
    {
      "statement": "The flow rate seems set at {flow_rate}%."
    },
    {
      "statement": "Printing is proceeding with a flow rate of {flow_rate}%."
    },
    {
      "statement": "Current extrusion rate equals {flow_rate}%."
    },
    {
      "statement": "The estimated flow rate is {flow_rate}%."
    },
    {
      "statement": "The flow rate reading is stable at {flow_rate}%."
    },
    {
      "statement": "The machine is extruding material at {flow_rate}%."
    },
    {
      "statement": "The actual flow rate observed is {flow_rate}%."
    },
    {
      "statement": "Flow rate adjustment is set to {flow_rate}%."
    },
    {
      "statement": "The extrusion rate has been recorded as {flow_rate}%."
    },
    {
      "statement": "The printer’s current flow setting is {flow_rate}%."
    },
    {
      "statement": "According to measurements, the flow rate is {flow_rate}%."
    },
    {
      "statement": "The flow rate of the filament is around {flow_rate}%."
    },
    {
      "statement": "Flow rate tuning indicates a value of {flow_rate}%."
    },
    {
      "statement": "The flow rate percentage stands at {flow_rate}%."
    },
    {
      "statement": "The calibrated flow rate is approximately {flow_rate}%."
    },
    {
      "statement": "The set flow rate for this print is {flow_rate}%."
    },
    {
      "statement": "Material extrusion flow rate is measured at {flow_rate}%."
    },
    {
      "statement": "The operational flow rate has been determined as {flow_rate}%."
    },
    {
      "statement": "Flow rate consistency shows {flow_rate}%."
    },
    {
      "statement": "Current print flow rate is estimated at {flow_rate}%."
    },
    {
      "statement": "The flow rate parameter is configured to {flow_rate}%."
    },
    {
      "statement": "Flow rate control is currently at {flow_rate}%."
    }
  ]
}